Calculator: Rectangular hollow section properties

Enter the labelled inputs to calculate: Area (mm²); Second moment of area Ix (mm⁴); Second moment of area Iy (mm⁴).

Area (mm²)
56
Second moment of area Ix (mm⁴)
2778.666667
Second moment of area Iy (mm⁴)
898.6666667

How the calculation works

A=bh−(b−2t)(h−2t); Ix=[bh³−(b−2t)(h−2t)³]/12

Sections use sharp corners and uniform dimensions; centroid origin is the outer bottom-left corner. Composite areas may be negative for holes, with positive net area. Stress and footing models are nominal elastic estimates, without code capacities. Footing pressure requires full contact, abs(e)≤B/6. Bolt moment is about the bolt-group centroid, with equal bolt stiffness.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Frequently asked questions

How is the result calculated?

A=bh−(b−2t)(h−2t); Ix=[bh³−(b−2t)(h−2t)³]/12

What assumptions apply?

Sections use sharp corners and uniform dimensions; centroid origin is the outer bottom-left corner. Composite areas may be negative for holes, with positive net area. Stress and footing models are nominal elastic estimates, without code capacities. Footing pressure requires full contact, abs(e)≤B/6. Bolt moment is about the bolt-group centroid, with equal bolt stiffness.

How precise are the displayed results?

Numerical results show up to ten significant digits. Rounding does not improve the accuracy of the input measurements or the model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →