Concrete mix calculator

Calculate material quantities from dry-volume ratios or your own mass recipe.

Cement (kg)
—
Sand volume (m³)
—
Aggregate volume (m³)
—
Whole bags
—
Water (L)
—
Estimated cost
—
Sand (kg)
—
Aggregate (kg)
—
Total including water (kg)
—

Mass mode uses your cement rate and mass ratios. Water is taken as 1 kg/L for the mass total. Quantities do not certify concrete strength or suitability.

Use the displayed units and your chosen coefficients. Approximate results show up to 12 significant digits. Blank optional prices leave costs undetermined. Counts round upward after allowance. Vd=Vwk(1+w/100); m=Vdcρ/(c+s+a); H₂O=m·W/C.

How the calculation works

Calculate material quantities from dry-volume ratios or your own mass recipe.

Mass mode uses your cement rate and mass ratios. Water is taken as 1 kg/L for the mass total. Quantities do not certify concrete strength or suitability.

Use the displayed units and your chosen coefficients. Approximate results show up to 12 significant digits. Blank optional prices leave costs undetermined. Counts round upward after allowance. Vd=Vwk(1+w/100); m=Vdcρ/(c+s+a); H₂O=m·W/C.

Frequently asked questions

How is the result calculated?

Vd=kV; mc=ρc·c·Vd/(c+s+a) ∨ V·C; ms=mc·rs; ma=mc·ra; mw=mc·W/C; N=ceil(mc/B).

What assumptions apply?

Mass mode uses your cement rate and mass ratios. Water is taken as 1 kg/L for the mass total. Quantities do not certify concrete strength or suitability.

How precise are the displayed results?

Approximate results show up to 12 significant digits. Use the displayed units and your chosen coefficients.

Also try:

Back to category →