Calculator: Hydraulic resistance units

Convert pressure drop per volume flow between hydraulic resistance units.

Value (kPa·s/L)
0.000001
Value (bar·min/L)
1.666666667e-10

How the calculation works

1 kPa·s/L=10⁶ Pa·s/m³; 1 bar·min/L=6×10⁹ Pa·s/m³

Convert pressure drop per volume flow between hydraulic resistance units. Dynamic viscosity alone does not determine this resistance without flow geometry.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Worked example: Value (Pa·s/m³): 1000000. Result: Value (kPa·s/L): 1; Value (bar·min/L): 0.0001666666667.

Frequently asked questions

How is the result calculated?

1 kPa·s/L=10⁶ Pa·s/m³; 1 bar·min/L=6×10⁹ Pa·s/m³

What assumptions apply?

Convert pressure drop per volume flow between hydraulic resistance units. Dynamic viscosity alone does not determine this resistance without flow geometry.

How precise are the displayed results?

Numerical results show up to ten significant digits. Rounding does not improve the accuracy of the input measurements or the model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Can I check a worked example?

Worked example: Value (Pa·s/m³): 1000000. Result: Value (kPa·s/L): 1; Value (bar·min/L): 0.0001666666667.

Also try:

Back to category →