Mash Water Calculator
Plan mash and sparge water from grain absorption, boil-off, batch volume and a strike-temperature estimate.
Enter valid values within the supported ranges. Results are cleared for invalid or incomplete input.
US mode uses US gallons, not Imperial gallons. Ratios use qt/lb or L/kg. The editable thermal coefficient defaults to 0.2 qt/lb and converts with the units. Mash water cannot exceed total water. Grain, target and strike temperatures must be 0–100°C. The heat-balance estimate excludes vessel heat capacity, altitude and volume contraction; calibrate absorption and thermal values for your equipment.
Calculation and assumptions
Plan mash and sparge water from grain absorption, boil-off, batch volume and a strike-temperature estimate.
US mode uses US gallons, not Imperial gallons. Ratios use qt/lb or L/kg. The editable thermal coefficient defaults to 0.2 qt/lb and converts with the units. Mash water cannot exceed total water. Grain, target and strike temperatures must be 0–100°C. The heat-balance estimate excludes vessel heat capacity, altitude and volume contraction; calibrate absorption and thermal values for your equipment.
Vtotal = Vbatch + Vboil + Vtrub + Vabs; Vmash = m × R; Ts = Tm + (C/R)(Tm−Tg).
Frequently asked questions
How is the result calculated?
Vtotal = Vbatch + Vboil + Vtrub + Vabs; Vmash = m × R; Ts = Tm + (C/R)(Tm−Tg).
What assumptions apply?
US mode uses US gallons, not Imperial gallons. Ratios use qt/lb or L/kg. The editable thermal coefficient defaults to 0.2 qt/lb and converts with the units. Mash water cannot exceed total water. Grain, target and strike temperatures must be 0–100°C. The heat-balance estimate excludes vessel heat capacity, altitude and volume contraction; calibrate absorption and thermal values for your equipment.
How precise are the results?
Numeric results show up to 12 significant digits; this does not improve model accuracy.