Mattress Size Calculator

Find the smallest standard EU or US mattress for your height, sleeping style and number of sleepers, the room it needs, or check a mattress against a bed frame.

Recommended mattress (cm)
—
Minimum width × length (cm)
—
Length reserve over your height (cm)
—
Minimum room (cm)
—
Total width clearance (cm)
—
Total length clearance (cm)
—
Mattress area (m²)
—
Length target from height and chosen extra (cm)
—
Mattress length minus your target (cm)
—

Length at least height + 20 cm; width 80, 90 or 99 cm per sleeper by sleeping style; the smallest standard size by area is chosen. Room: 50 cm on each side and 150 cm at the foot end. Mattresses from different makers can differ by a few centimetres.

Calculation and assumptions

ΔW = W_b − W_m; ΔL = L_b − L_m; A = W_m L_m / 10000. L_target = height + extra; margin = L_m − L_target.

Clearance is the total difference, not the gap on each side. A negative value means the mattress exceeds the opening on that axis. Rectangles only; measure actual products. Regional names, thickness, compression and manufacturer tolerances are not inferred. The length target is your height plus your chosen extra. The example extra is not a universal recommendation; a negative length margin means the mattress is shorter than your target.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Frequently asked questions

How is the result calculated?

ΔW = W_b − W_m; ΔL = L_b − L_m; A = W_m L_m / 10000. L_target = height + extra; margin = L_m − L_target.

What assumptions apply?

Clearance is the total difference, not the gap on each side. A negative value means the mattress exceeds the opening on that axis. Rectangles only; measure actual products. Regional names, thickness, compression and manufacturer tolerances are not inferred. The length target is your height plus your chosen extra. The example extra is not a universal recommendation; a negative length margin means the mattress is shorter than your target.

How precise are the results?

Results show up to ten significant digits. Display precision does not improve the accuracy of the measurements or model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →