Calculator: Microstrip impedance approximation

Enter the labelled inputs to calculate: Resistance Z₀ (Ω); Coefficient εeff.

Resistance Z₀ (Ω)
126.612792
Coefficient εeff
1

How the calculation works

u=w/h; εeff=(εr+1)/2+(εr−1)[(1+12/u)^−½+0.04(1−u)²(u<1)]/2; Z₀(u≤1)=60ln(8/u+u/4)/√εeff

Assumes ideal resistive ports and lossless components. L matching uses series L on the low-resistance side and shunt C across the high resistance. T/pi attenuators have equal port impedance. Printed-line approximations use zero conductor thickness; stripline is centered between planes separated by b. Dispersion and losses are excluded.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Frequently asked questions

How is the result calculated?

u=w/h; εeff=(εr+1)/2+(εr−1)[(1+12/u)^−½+0.04(1−u)²(u<1)]/2; Z₀(u≤1)=60ln(8/u+u/4)/√εeff

What assumptions apply?

Assumes ideal resistive ports and lossless components. L matching uses series L on the low-resistance side and shunt C across the high resistance. T/pi attenuators have equal port impedance. Printed-line approximations use zero conductor thickness; stripline is centered between planes separated by b. Dispersion and losses are excluded.

How precise are the displayed results?

Numerical results show up to ten significant digits. Rounding does not improve the accuracy of the input measurements or the model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →