Picture Frame Geometry Calculator

Find outer dimensions from the visible image opening, mat border and frame face.

Outer width (cm)
44
Outer height (cm)
54
Outer perimeter (m)
1.96
Visible mat area (m²)
0.08
Width including mat (cm)
—
Height including mat (cm)
—
Image width/height ratio
—
Aspect-ratio band
—
Wall-space width with allowance (cm)
—
Wall-space height with allowance (cm)
—

Mat size adds twice the border; outer size also adds twice the frame face. Wall-space dimensions multiply outer size by 1 + allowance/100; 20% is an editable example, not a fitting rule. Image bands: ratio <0.8 portrait, 0.8–1.1 near-square, >1.1–1.4 landscape, >1.4 panoramic. Uniform borders are assumed. Perimeter excludes cutting waste, rebate overlap, joints and hardware. Inputs: image 1–1000 cm, mat 0–100 cm, face 0–50 cm, allowance 0–200%.

Calculation and assumptions

W_o = W + 2(M+F); H_o = H + 2(M+F); P = 2(W_o+H_o)/100; A_m = ((W+2M)(H+2M)−WH)/10000.

Uniform borders and a rectangular opening are assumed. The outer perimeter excludes cutting waste. Rebate overlap, glass, backing, joints and hardware need separate workshop dimensions; this is not a cutting list.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Mat size adds twice the border; outer size also adds twice the frame face. Wall-space dimensions multiply outer size by 1 + allowance/100; 20% is an editable example, not a fitting rule. Image bands: ratio <0.8 portrait, 0.8–1.1 near-square, >1.1–1.4 landscape, >1.4 panoramic. Uniform borders are assumed. Perimeter excludes cutting waste, rebate overlap, joints and hardware. Inputs: image 1–1000 cm, mat 0–100 cm, face 0–50 cm, allowance 0–200%.

Frequently asked questions

How is the result calculated?

W_o = W + 2(M+F); H_o = H + 2(M+F); P = 2(W_o+H_o)/100; A_m = ((W+2M)(H+2M)−WH)/10000.

What assumptions apply?

Uniform borders and a rectangular opening are assumed. The outer perimeter excludes cutting waste. Rebate overlap, glass, backing, joints and hardware need separate workshop dimensions; this is not a cutting list.

How precise are the results?

Results show up to ten significant digits. Display precision does not improve the accuracy of the measurements or model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →