Backup Power Runtime and Capacity

Estimate runtime from nominal watt-hours and the nominal capacity needed for a target duration.

Total load (W)
—
Estimated runtime (h)
—
Nominal energy needed for target (Wh)
—
Nominal capacity at entered voltage (mAh)
—
Power with entered margin (W)
—

P = Pₗ/η+P₀; t = E·u/P; Eᵣ = P·tᵣ/u; Q = Eᵣ/V·1000; Pᵍ = Pₗ(1+w/100). Energy projections assume the entered rates and do not model weather, starting loads or tariff changes beyond the stated inputs. Decimal input uses a dot, up to 12 digits before and after it, and an optional exponent from −24 to 24. Input magnitudes are limited to 10¹²; each formula has additional domain limits. Displayed approximate results use up to 12 significant digits.

Method, assumptions and limits

Estimate runtime from nominal watt-hours and the nominal capacity needed for a target duration.

P = Pₗ/η+P₀; t = E·u/P; Eᵣ = P·tᵣ/u; Q = Eᵣ/V·1000; Pᵍ = Pₗ(1+w/100). Energy projections assume the entered rates and do not model weather, starting loads or tariff changes beyond the stated inputs.

Decimal input uses a dot, up to 12 digits before and after it, and an optional exponent from −24 to 24. Input magnitudes are limited to 10¹²; each formula has additional domain limits. Displayed approximate results use up to 12 significant digits.

Frequently asked questions

How should I interpret this estimate?

P = Pₗ/η+P₀; t = E·u/P; Eᵣ = P·tᵣ/u; Q = Eᵣ/V·1000; Pᵍ = Pₗ(1+w/100). Energy projections assume the entered rates and do not model weather, starting loads or tariff changes beyond the stated inputs. Decimal input uses a dot, up to 12 digits before and after it, and an optional exponent from −24 to 24. Input magnitudes are limited to 10¹²; each formula has additional domain limits. Displayed approximate results use up to 12 significant digits.

Also try:

Back to category →