Calculator: Wire resistance from resistivity

Enter the labelled inputs to calculate: Resistance (Ω); Area (mm²).

Resistance (Ω)
—
Cross-sectional area (mm²)
—
Voltage drop (V)
—
Wire power loss (W)
—
Voltage drop relative to reference (%)
—

R = ρ·L/A. Enter resistivity in Ω·mm²/m, one-way length in m and area in mm² or diameter in mm. The return option doubles the entered length. ΔV = I·R; P = I²·R. Blank reference voltage hides the percentage. Constant resistivity and DC model.

Resistors in Series and Parallel Calculator →

How the calculation works

A=πd²/4; R=ρL/A

Ideal lumped components are assumed. Parasitics, saturation, mutual inductance, losses and switching ripple are excluded unless explicitly included in the formula.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Frequently asked questions

How is the result calculated?

A=πd²/4; R=ρL/A

What assumptions apply?

Ideal lumped components are assumed. Parasitics, saturation, mutual inductance, losses and switching ripple are excluded unless explicitly included in the formula.

How precise are the displayed results?

Numerical results show up to ten significant digits. Rounding does not improve the accuracy of the input measurements or the model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →