Calculator: Linear stiffness units

Convert force per displacement between linear stiffness units.

Value (N/mm)
0.001
Value (kN/m)
0.001
Value (lbf/in)
0.005710147155

How the calculation works

1 N/m=0.001 N/mm; 1 lbf/in=(4.4482216152605/0.0254) N/m

Convert force per displacement between linear stiffness units. Young’s modulus describes material stress over strain and additionally needs geometry.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Worked example: Value (N/m): 1000. Result: Value (N/mm): 1; Value (kN/m): 1; Value (lbf/in): 5.710147155.

Frequently asked questions

How is the result calculated?

1 N/m=0.001 N/mm; 1 lbf/in=(4.4482216152605/0.0254) N/m

What assumptions apply?

Convert force per displacement between linear stiffness units. Young’s modulus describes material stress over strain and additionally needs geometry.

How precise are the displayed results?

Numerical results show up to ten significant digits. Rounding does not improve the accuracy of the input measurements or the model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Can I check a worked example?

Worked example: Value (N/m): 1000. Result: Value (N/mm): 1; Value (kN/m): 1; Value (lbf/in): 5.710147155.

Also try:

Back to category →