Metal Weight Calculator

Calculate plates, rods and ideal profiles, or estimate sheet quantities by area.

Mass per item (kg)
—
Total mass (kg)
—
Cross-section (mm²)
—
Volume per item (m³)
—
Mass per length (kg/m)
—
Mass per area (kg/m²)
—
Whole sheets
—
Supplied area (m²)
—
Second moment Iy (cm⁴)
—
Elastic section modulus Wel,y (cm³)
—

All lengths are in mm. Positive dimensions: 10⁻⁶–10⁹; density: 1–100000 kg/m³; quantity: 1–10⁹ whole items. Sheet area: 10⁻¹²–10¹² m²; reserve: 0–1000%. Density is editable; 7850 is an approximate steel example. Profiles have sharp corners; holes, fillets, coatings and tolerances are excluded. Channel area = (h−2tf)tw + 2btf. Sheet count rounds required area with reserve upward and does not model cutting layouts. Results use up to 12 significant digits.

Catalogue mass uses the published kg/m; density presets do not change catalogue properties. Select an exact designation; no nearest-size substitution is used. Rectangular tube dimensions include both outer sides and wall thickness; sharp corners are assumed. Density presets are nominal examples at room temperature, not batch certificates; the density field remains editable.Published section properties describe the selected section, not a load-capacity calculation.

How the calculation works

All lengths are in mm. Positive dimensions: 10⁻⁶–10⁹; density: 1–100000 kg/m³; quantity: 1–10⁹ whole items. Sheet area: 10⁻¹²–10¹² m²; reserve: 0–1000%. Density is editable; 7850 is an approximate steel example. Profiles have sharp corners; holes, fillets, coatings and tolerances are excluded. Channel area = (h−2tf)tw + 2btf. Sheet count rounds required area with reserve upward and does not model cutting layouts. Results use up to 12 significant digits.

Catalogue mass uses the published kg/m; density presets do not change catalogue properties. Select an exact designation; no nearest-size substitution is used. Rectangular tube dimensions include both outer sides and wall thickness; sharp corners are assumed. Density presets are nominal examples at room temperature, not batch certificates; the density field remains editable.Published section properties describe the selected section, not a load-capacity calculation.

Frequently asked questions

How is the result calculated?

All lengths are in mm. Positive dimensions: 10⁻⁶–10⁹; density: 1–100000 kg/m³; quantity: 1–10⁹ whole items. Sheet area: 10⁻¹²–10¹² m²; reserve: 0–1000%. Density is editable; 7850 is an approximate steel example. Profiles have sharp corners; holes, fillets, coatings and tolerances are excluded. Channel area = (h−2tf)tw + 2btf. Sheet count rounds required area with reserve upward and does not model cutting layouts. Results use up to 12 significant digits.

Also try:

Back to category →