Ideal Rectangular Hollow Profile Mass

Estimate mass from outside width and height, uniform wall thickness and material density.

Material cross-section area (mm²)
864
Mass per unit length (kg/m)
6.7824
Total mass of all pieces (kg)
81.3888

Calculation and assumptions

A = WH−(W−2t)(H−2t) = 2t(W+H−2t); μ = Aρ/10⁶; M = μLN.

Both inner dimensions must remain positive. This model has sharp inside and outside corners and constant thickness. Real corner radii, welds, manufacturing tolerances, coatings and fittings are excluded, so catalogue mass can differ. The editable density is not a material-grade specification. No strength, stiffness, pressure rating or load capacity is inferred.

Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Frequently asked questions

How is the result calculated?

A = WH−(W−2t)(H−2t) = 2t(W+H−2t); μ = Aρ/10⁶; M = μLN.

What assumptions apply?

Both inner dimensions must remain positive. This model has sharp inside and outside corners and constant thickness. Real corner radii, welds, manufacturing tolerances, coatings and fittings are excluded, so catalogue mass can differ. The editable density is not a material-grade specification. No strength, stiffness, pressure rating or load capacity is inferred.

How precise are the results?

Results show up to ten significant digits. Display precision does not improve the accuracy of the measurements or model. Values must satisfy the formula’s domain. Nonzero results too small or too large for reliable representation are rejected.

Also try:

Back to category →